Light Duty Casters
Light duty casters in this catalogue are compact top-plate caster series for carts, trolleys and equipment sourcing. Eight series share listed 75, 100 and 125 mm wheel sizes, while the wheel construction includes PU, TPR, rubber, solid-wheel and PP options. “Light duty” is a range label; final load and material suitability must be confirmed for the exact model.
KORONO manufactures these caster ranges in Hengshui, Hebei, China, and supplies importers, distributors and equipment manufacturers directly. Match the 62 × 92 mm top plate and 75 × 45 mm hole centres to the equipment drawing, then compare wheel family and operating conditions before requesting a quotation.
How to choose a light duty caster range
| Selection point | Published options on this page | Confirm for your equipment |
|---|---|---|
| Mounting fit | 62 × 92 mm top plate, 75 × 45 mm hole centres and 8.5 mm bolt holes | Plate orientation, fasteners, mounting height and swivel/brake clearance |
| Wheel family | PU, TPR, rubber, solid-wheel and PP series | Floor surface, liquids, cleaning method, temperature, noise and marking requirements |
| Configuration | Rigid, swivel and swivel-with-brake options are listed on the relevant series pages | Quantity and position of each configuration |
| Load requirement | Exact rating confirmed for the selected model | Total equipment weight including payload, caster count, distribution, speed, obstacles and duty cycle |
Shared mounting dimensions can simplify comparison, but they do not prove equal load capacity, rolling behaviour, material grade or environmental suitability. Use the intended series page and equipment drawing for final confirmation.
Light Duty TPR Caster
View specifications →
Light Duty Black Rubber Caster
View specifications →
Light Duty White Solid-Wheel Caster
View specifications →
Light Duty Yellow PP Caster
View specifications →
Light Duty Globe-Tread PP Caster
View specifications →
Light Duty Open-Spoke PP Caster
View specifications →
Light Duty Gold-Core Rubber Caster
View specifications →Check light duty caster replacement dimensions
The eight series above list the same mounting dimensions for these wheel sizes. Use this comparison to check available space, then open the intended series to confirm its configuration. Matching dimensions do not establish the same load rating or wheel performance.
| Wheel diameter (mm) | Mounting height (mm) | Tread width (mm) | Top plate (mm) | Hole centres (mm) | Bolt hole (mm) |
|---|---|---|---|---|---|
| 75 | 100 | 32 | 62 × 92 | 75 × 45 | 8.5 |
| 100 | 125 | 32 | 62 × 92 | 75 × 45 | 8.5 |
| 125 | 150 | 32 | 62 × 92 | 75 × 45 | 8.5 |
What should I measure before replacing a caster?
Measure wheel diameter and overall mounting height separately. Match both hole-centre dimensions and plate orientation to your equipment drawing. Also check turning clearance and brake access; a matching plate size alone does not confirm fit.
How do I compare TPR, PU, PP and rubber options?
Start with the series specification and tell us about floor material, surface condition, operating load, cleaning chemicals, temperature and any noise or marking requirements. Confirm material grade, load rating and suitability for the exact model before ordering; do not select by wheel colour alone.
View TPR rigid and swivel examples · View iron-core PU specifications · Use the replacement measurement checklist
Choose the right caster configuration
Share your total equipment weight and payload, wheel diameter, mounting drawing, floor conditions, brake requirements, order quantity and destination. Load capacity and suitability must be confirmed for the selected model.
Read our purchasing guide and FAQs · Request a bulk quotation · Compare all 28 series
Planning a sample or bulk order? Review the industrial caster manufacturing and export process, then send the exact series, mounting information, quantity and destination for confirmation.